Gladiator Full Rear Bumper For 20-Pres Jeep Gladiator No Tire Carrier Rigid Series Rock Slide Engineering - RB-F-101-JT
Rock Slide Engineering gives you a sleek, finished, look with the Rigid Full Rear Bumper. It is built with 10-gauge steel, designed to follow factory lines and mate up with stock fender flares. Comes with an integrated recovery hitch and recovery points. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. This product utilizes the factory mounting points for an easy, no-drill installation.
Note:
This product does not have a spare tire integration.
Depending on if you are moving from a plastic bumper or steel bumper to our aftermarket bumper, you may need to purchase additional / replacement bezels for the sensors (if applicable).
Sensor Mounting Bracket (center right)- Mopar (68295600AC)
Sensor Mounting Bracket (center left)- Mopar (68295601AC)
Sensor Mounting Bracket (outer right)- Mopar (68295602AC)
Sensor Mounting Bracket (outer left) – Mopar (68295603AC)
Park Distance Bezel – Mopar (6MH82RXFAB)
Park Distance Bezel – Mopar (6MH83RXFAB)
Park Distance Bezel – Mopar (6MH84RXFAB)
Park Distance Bezel – Mopar (6MH85RXFAC)
4x Decoupler Ring – Mopar (68289851AA)
Features:
3/16” Steel
Powder Coat: Textured Black
Recovery Hitch
Recovery Points
Made in the USA
Fits:
JT Gladiator
Includes:
Rear Bumper
Additional Mounting Hardware
Limited Lifetime Warranty on Powder Coat and Electrical Components
Install Time:
2 Hours
Specifications:
| Country of Origin | USA |
| Sold As | Each |
| UPC | 887753659910 |
| Availability | Available |
| Location | Rear |
| Universal | No |
| Number of Boxes | 1 |
Original: $1,429.99
-70%$1,429.99
$429.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Rock Slide Engineering gives you a sleek, finished, look with the Rigid Full Rear Bumper. It is built with 10-gauge steel, designed to follow factory lines and mate up with stock fender flares. Comes with an integrated recovery hitch and recovery points. We use a state-of-the-art automated powder coat system to acid etch the raw base material in preparation for the textured black topcoat. This product utilizes the factory mounting points for an easy, no-drill installation.
Note:
This product does not have a spare tire integration.
Depending on if you are moving from a plastic bumper or steel bumper to our aftermarket bumper, you may need to purchase additional / replacement bezels for the sensors (if applicable).
Sensor Mounting Bracket (center right)- Mopar (68295600AC)
Sensor Mounting Bracket (center left)- Mopar (68295601AC)
Sensor Mounting Bracket (outer right)- Mopar (68295602AC)
Sensor Mounting Bracket (outer left) – Mopar (68295603AC)
Park Distance Bezel – Mopar (6MH82RXFAB)
Park Distance Bezel – Mopar (6MH83RXFAB)
Park Distance Bezel – Mopar (6MH84RXFAB)
Park Distance Bezel – Mopar (6MH85RXFAC)
4x Decoupler Ring – Mopar (68289851AA)
Features:
3/16” Steel
Powder Coat: Textured Black
Recovery Hitch
Recovery Points
Made in the USA
Fits:
JT Gladiator
Includes:
Rear Bumper
Additional Mounting Hardware
Limited Lifetime Warranty on Powder Coat and Electrical Components
Install Time:
2 Hours
Specifications:
| Country of Origin | USA |
| Sold As | Each |
| UPC | 887753659910 |
| Availability | Available |
| Location | Rear |
| Universal | No |
| Number of Boxes | 1 |
