5" TRAIL W/ DL RESI SHKS 2018-22 JEEP JL 4WD 4-DOOR. - K4141DL

This 5in Trail system for the Jeep JL provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. On road, the JL suspension has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory control arm mounts for an easy installation. The Fabtech heavy duty link arms are constructed of 1.75in OD. .250in thick wall steel tubing that are guaranteed never to bend. They come with large poly urethane bushings on one end with internal threads on the other to accept the ground breaking Fabtech 5 Ton Joint for longevity and a quiet ride. Fabtech's long travel Dual Rate coil Springs are corner specific to the Jeep JL. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip System along with a heavy duty Track Bar bracket is included. This relocates the steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The factory angle of the draglink to the pitman arm does not change and there is no increased side load on the steering box sector shaft as compared to using a dropped pitman arm. This helps extends the life of the steering box with the increased ride height. The heavy duty rear Track Bar bracket with side support maintains the factory roll center of the vehicle while centering the axle. Front and rear bumps stop extensions protect the suspension from over cycling. Each Fabtech component has been designed with specific features and benefi

Specifications:

California Proposition 65	WARNING: Cancer & Reproductive Harm and image
Title	Fabtech 5" TRAIL W/ DL RESI SHKS 2018-22 JEEP JL 4WD 4-DOOR
Description_ASC	W/ STANDARD FENDERS TIRE SIZE - 37/12.5R17 WHEEL - 17X9 W/4.5" BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE - 37/12.5R18 WHEEL - 18X9 W/4.5" BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE - 37/12.5R20 WHEEL - 20X9 W/5" BS W/MINOR TRIMMING; W/ HIGH CLEARANCE FENDERS TIRE SIZE - 40/12.5R17 WHEEL - 17X9 W/4.5" BS W/CUTTING; W/ HIGH CLEARANCE FENDERS TIRE SIZE - 40/12.5R18 WHEEL - 18X9 W/4.5" BS W/CUTTING; W/ HIGH CLEARANCE FENDERS TIRE SIZE - 40/12.5R20 WHEEL - 20X9 W/5" BS W/CUTTING; 185. FITS 4-DOOR MODELS ONLY; 189. HEAVY OFFROAD USE REQUIRES DRIVESHAFTS 4 DOOR MODELS FRONT (FTS94057) REAR (FTS94065); 224. DOES NOT FIT 4XE MODELS; 225. DOES NOT FIT RUBICON 392 MODELS
Description_DEF	Suspension Lift Kit
Description_DES	5" TRAIL W/ DL RESI SHKS 2018-22 JEEP JL 4WD 4-DOOR
Description_EXT	5" TRAIL W/ DL RESI SHKS 2018-22 JEEP JL 4WD 4-DOOR.
Description_INV	Fabtech-5" TRAIL W/ DL RESI
Description_MKT	This 5in Trail system for the Jeep JL provides enhanced suspension performance to address all variants of off highway travel use including rock crawling, aggressive trail use and overland expeditions. On road, the JL suspension has been tuned with proper dual rate coil springs and shock valving to provide a very compliant ride that you will appreciate. The system is a complete short arm suspension that utilizes the factory control arm mounts for an easy installation. The Fabtech heavy duty link arms are constructed of 1.75in OD. .250in thick wall steel tubing that are guaranteed never to bend. They come with large poly urethane bushings on one end with internal threads on the other to accept the ground breaking Fabtech 5 Ton Joint for longevity and a quiet ride. Fabtech's long travel Dual Rate coil Springs are corner specific to the Jeep JL. This keeps the vehicle level side to side and allows for increased suspension travel. The first stage of the spring provides a soft ride with the ability to extend for additional travel. The second stage is designed to handle the payload of the vehicle and address large impact absorption at higher speeds. To address the steering geometry with the increased ride height, a Draglink Flip System along with a heavy duty Track Bar bracket is included. This relocates the steering geometry to the factory plane allowing for full articulation without binding the draglink ends in extreme conditions. The factory angle of the draglink to the pitman arm does not change and there is no increased side load on the steering box sector shaft as compared to using a dropped pitman arm. This helps extends the life of the steering box with the increased ride height. The heavy duty rear Track Bar bracket with side support maintains the factory roll center of the vehicle while centering the axle. Front and rear bumps stop extensions protect the suspension from over cycling. Each Fabtech component has been designed with specific features and benefi
Description_SHO	5" TRAIL W/ DL RESI

This Part Fits:

Year	Make	Model	Submodel	Notes
2018,2021	Jeep	Wrangler	Unlimited Rubicon
2018,2021	Jeep	Wrangler	Unlimited Sahara
2018,2021	Jeep	Wrangler	Unlimited Sport
2018,2021	Jeep	Wrangler	Unlimited Sport S